Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't rot or rust like aluminum or timber.

It is important to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, making it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good shape.

Single-pane windows are relatively simple to replace and will usually fit into the frames that were previously in use very easily. If you have double-paned windows that are held together by internal beading, it is harder to remove and replace the old panes. In this instance, you will need to source some plastic spacers to assist the new pane to fit perfectly into the frame of the window.

If you plan to try to remove the window panes yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor, where they could be trampled.

It's a great idea seal the gap after the glass is removed. This will keep water and drafts from entering your home until a professional arrives to repair the window. This will also provide a barrier to prevent any criminals from getting into your home. If the gap is large, you may be interested in the security door with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. However, over time they can suffer from a variety of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It's crucial to act as soon as you notice your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sagging. To accomplish this, you'll need open the window so that you can access the frame. Then, using an screwdriver, remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and check for fitting. If you're happy with the fit, you can tighten the screws until they stay in the right place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows are watertight and draught-proof.

Upvc Window Repair handles could also loosen. This is usually due to screws that have been removed over time, but it can be caused by the handle mechanism wears out. It's relatively easy to fix a loose uPVC hand. You'll first need to close the window and do an experiment fitting. The corners of the sash must be aligned with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains it's important to take action. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix and should be undertaken by any competent DIYer. Based on the severity of the problem the caulking that was used up may need to be removed before a new layer of caulk can be put on. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk and then make the area harder to clean and could reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double-glazed window, it is more likely that the issue is more related to the seal, not the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, Upvc Window repair or slack and open with a breeze It could be hinges that are at fault. These are easily repaired by any DIYer who is skilled and can be done within a few minutes.

Like any mechanical component hinges are prone to wear out over time. It is essentially a simple process but it can be easier with someone else to help you hold the frame in place.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused by opening the window incorrectly or due to a poor installation in the factory. Sending us a photo through our website can often resolve the problem. We are always happy to provide suggestions.

It is also essential to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It can also stop corrosion and decrease the chance of sticking. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges can also become disaligned as a result of wear, creating gaps where the sash and frame meet. If they are beyond repair, it could be necessary to get them re-aligned. Secondly the interlock, this is on the hinge side of the window and can also become misaligned, again it's possible to give them a good clean, but in certain cases, UPVC window repair it may be necessary to have them replaced.

The next common cause of draughts is the window seals. These can become worn down or damaged over time and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures, and also lessen the risk of draughts.

One of the most effective methods to reduce the draughts in your home is to use an draught excluder. These are usually fabric tubes which are filled with a sort of filler and can be positioned on top of your windowsill. These will help to block out cold air and keep your home warm and cosy!

With a little regular maintenance and repairs your windows made of upvc will continue to provide excellent security and insulation for your home. However, it is important to realize that windows last for a certain period of time and there may come an point at which it is more economical to replace them than fix them. So, if you are having issues with your upvc windows, it is always best to seek professional assistance as soon as you can.